| 4 Channel PT-04 Wireless Flash Trigger Control with Remote & umbrella holder bracket lock for Canon Nikon and Three Receivers | 
| Brand: BV & Jo
Category: Photography
Buy New: £39.99
as of 7/2/2012 21:39 CST details
Seller: BV-electronics
Sales Rank: 13,902
Media: Electronics
MPN: Trigger C1 + 2 x RC
EAN: 5060184066402
ASIN: B003N52YWQ
Availability: Usually dispatched within 1-2 business days
| |
| Features:
| • | This wireless trigger is control discreteness for camera to trigger hot shoe flashgun synchronously. | | • | It can be used for other one pin contact hotshoe flashs as well, such as Nikon Sb-600,Sb-800,Sb50. | | • | This principal works by one transmitter and one receiver. | | • | The signal transmitter can transmit the wireless signal that is being encoded, | | • | the receive work with a CR2/3V battery, and decode with a microprocessor |
| |
| Editorial Reviews:
Product Description
User instruction: 1. Make sure the transmitter and the receiver are at the SAME control channel. On the transmitter, the blue DIP switch of channel setting is on bottom side; on the receiver, the channel setting switch is inside the battery compartment. By channel setting, you can group the flash equipment into channel 1, 2, 3 or 4, and then switch the transmitter into channel 1, 2, 3 or 4 to control the different lighting group. 2. Insert the X Sync Cord into the PC terminal of the receiver, insert the 1/4" (6mm) or 1/8" (3mm) phone jack plug into the jack of your flash equipment, then switch on the receiver. 3. Press the TEST button of the transmitter to confirm operation of the flash equipment in the chosen configuration before taking photography. 4. Connect the transmitter with your light meter by the X Sync Cord. Press the metering button of the light meter to meter light. Please make sure the shutter speed is not more than the max Sync speed of your camera. Adjust the light output of the flash equipment if needed, then meter light again. Disconnect the transmitter with the light meter. 5. Mount the transmitter on the camera hot shoe. If your camera does not have a hot shoe but have a PC terminal, then connect the transmitter with the camera by the X Sync Cord. Feel annoying by connect and disconnect the transmitter with the light meter or the camera? We strongly recommend you buy an additional transmitter. Thus you can have one transmitter for the light meter and on for the camera! 6. Set the camera into M mode, and then set the desired shutter speed and metered aperture value. Now you can trigger the flash equipment by press the shuttle release button of the camera to take pictures. Package Includes: 1x Transmitter 3 x Receivers 3 x Receiver batteries In the list, the flashgun is not included
|
|
|
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON EU S.à.r.l. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME. Batteries on sale in the UK |
Our Ebay Auctions for 4 Channel PT-04 Wireless Flash Trigger Control with Remote & umbrella holder bracket lock for Canon Nikon and Three Receivers
4 Channel PT-04 Wireless Flash Trigger Control with Remote & umb
4 Channel PT-04 Wireless Flash Trigger Control with Remote & umbrella holder bracket lock for Canon Nikon and Three Receivers
|
|
|
|
